Reinforcing Mesh Welding Machines use the wire from the coil and the cross line from the pre-cut line. The structure of Reinforcing Mesh Welding Machine is modular, allowing you to start with a low investment and focus on the short set-up time of the wire diameter and the format change of the machined mesh.
The 6-12mm New Reinforcing Mesh Welding Machine adopts NC synchronous control technology. The welding time and individually controlled welding time consist of a PLC digital programming system. The input panel is a touch screen or a keyboard. The operation is more intelligent and reasonable. The main advantage of this control is that you can display more than 30 grids on the same grid surface, these grids have different sizes between latitude and longitude.