Automatic wire mesh welding machines are mainly used for welding fences and floor roof wire mesh.
Operation process of Automatic wire mesh welding machines:
The warp and weft yarns required by the equipment are pre-sheared by the automatic straightening cutter. The warp yarns are placed on the corresponding warp yarn grooves, the weft yarns are placed in the corresponding weft yarn grooves, and the blank feeder is controlled to automatically pass the steps respectively. The motor is punched and welded; the stepper motor controls the mesh drawing process to ensure an accurate and uniform mesh.
The grid size and welding parameters are set by direct input on the operator panel, which is simple and accurate in operation.
Both wire and crossover coils for Automatic wire mesh welding machines are automatically straightened, cut and fed. The completed mesh will also be automatically returned and cut. The wire is automatically straightened, stored and fed. The cross line is automatically straightened, stored and fed on the production line. Wires and crossover wires are supplied by coils compared to conventional reinforced mesh welding equipment. Automatic feeding, recoil, cutting and discharge of welded mesh rolls, maximizing labor savings and greatly increasing production.