Views: 9 Author: Site Editor Publish Time: 2019-10-21 Origin: Site
3-6mm automatic roll wire mesh welding machine
This machine can make both of panel mesh and roll mesh.
Line wires are fed from wire coils automatically and through straighteing rollers.
Cross wire should be pre-cut and fed by cross wrie feeder automatically.
Iquipped with cutting machine to make panel mesh and rolling machine to make roll mesh.
1.Welding electrodes-chromium zirconium copper upper-20mm diameter.
Lower-20*20mm,can be used 6sizes.
The welding electrode distance can be adjusted.
2.Main motor(5.5kw)planetary reducer connet the main axis directly,instead of by chain.
It is not easlily broken.
Big transmission torque,suitable for high welding speed.
3.Cast water colling welding transformers
Stuitable for high temperature.
When 2.5-4mm one welding transformer controls 8 electrodes.
When 4-6mm,one welding transformer controls 4 welding eletrodes.
4.Panasonic brand servo motor(2kw)for mesh pulling,accurate,big power.SMC air cylinders controls the hook up &down.
J&T brand pulling rack,less noise,high accuracy.