Reinforcing Mesh Welding Machine

Reinforcing Mesh Welding Machine uses the wire from the coil and the cross line from the pre-cut line. The range is from Ø3 to Ø6mm.Reinforcing Mesh Welding Machine is ideal for the production of Reinforcing Mesh. Reinforcing Mesh Welding Machine is driven by a digital electric servo motor.

Exclusive Features:

• Unparalleled geometric guarantee - the mesh is welded in precise dimensions;

• WORLD exclusive 4th generation double cross ray/feeding system;

• Special adjustment of direct/spot welding for ultimate control and weld quality.

• High quality mesh

• Entry level: very competitive price

• Upgrade of crossover (flying) and wire (double parallel wire feeder with automatic picker or Barlift) via automatic feed group

 

The structure of Reinforcing Mesh Welding Machine is modular, allowing you to start with a low investment and focus on the short set-up time of the wire diameter and the format change of the machined mesh. Driven by a digital electric servo motor.

Grid plate width (min÷max): 1,25 m÷2, 50 m 1,25 m÷3 m

Grid plate length (minimum ÷ maximum): 3÷6 m (up to 12 m depending on requirements)

Line spacing (minimum): 100 mm (50-75 mm on request)

Cross line spacing (min): 20 mm

Wire diameter Ø: 3÷12 mm

Maximum working speed (welding / minute): 120 cross lines / minute