How to use China Welded wire mesh making machine correctly

Secure-nett tells you how to use China Welded wire mesh making machine correctly.

1.China Welded wire mesh making machine can be welded after passing through the water. The moving parts of the welding machine should be kept lubricated frequently. The welding parts should be welded after cleaning to avoid damaging the electrodes or affecting the service life of the welding electrodes.

2.When  Welded wire mesh making machine is working at a temperature below zero degrees Celsius, the cooling water remaining in the cooling line should be blown off with compressed air after welding to avoid freezing and freezing of the water pipe and the welding transformer.

3.China Welded wire mesh making machine should be repaired and maintained after the power is cut off. The operator should wear canvas gloves and work around to avoid burns.

4. China Welded wire mesh making machine can not be damp to prevent leakage. Before using the welder for a long time, check whether the insulation resistance is qualified. Use 500V megohmmeter to test the insulation resistance between the incoming power supply line and the outer casing of the welder to be no less than 2.5 megohms.

5. The Welded wire mesh making machine should have no corrosive gas, chemical deposits and corrosive, explosive and flammable media that seriously affect the insulation performance of the welder.

6. China Welded wire mesh making machine should work strictly according to the rated load continuation rate, and no overloading is allowed.